Radio Remote Controlled Crane Service Truck industrial wireless controls are generally designed to increase jobsite safety by providing the operator the safest vantage point for tank delivery. This wireless remote control system can be controlled by a single man operator and it literally eliminates a second person instructing the operator where to position the tank. While using these Crane Service remote controls the operator has the freedom of movement around entire worksite while setting tank precisely into position.wrecker El Paso

Handheld Transmitter Specifications:

Handheld transmitters are available with up to twelve crane control buttons as specified by customer.

The normal frequency of the operation is 902-928 MHZ and it is also enabled with Frequency Hopping Spread Spectrum technology. Optional 869.7 and 2.4GHz frequency system are also available.towtruck Clarksville

The transmitter power is normally 100MW.

The handheld transmitter works with 56 bit DES encryption key method of transmission.

An internal ‘on card’ PCB mounted antenna is also available with a normal range of 500 feet.

High range is also available with an additional external antenna. The range of the external antenna can be up to 2000ft.

The transmitter unit is constructed in a rugged weatherproof polymer enclosure.

The transmitter is capable to work in temperature specifications between minus 20 F to 185 F.

Rechargeable transmitter delivers 30 hrs of continuous use between charges (charger supplied).

Audible low battery warning is available with a flashing low battery indicator.

Generally rechargeable lithium ion battery is used with 12/24VDC charger.

The unit is intrinsically safe for using in hazardous environments as well as in ROHS Lead-Free compliant.

Receiver Specifications:

The frequency of the receiver is 902-928 MHz with FHSS power. Additional 433.92, 869.7 and 2.4GHz systems are also available.wrecker service beaumont

12/24VDC power supply is required to control the receiver unit. Optional 120VAC systems are also available with additional features.

The receiver unit can take current load Up to 4Amps @ 12VDC per channel or 10Amps DC per system total. High Current 30Amp “H” series receiver systems are also available.

The whole unit is constructed in an IP67 rated impact resistant polycarbonate enclosure. The receiver unit can be external mounted if required.

Internally protected and encased antennal is also available. The operator may also use external antenna whenever required.

All the wiring connections are pre-wired to meet all the OEM requirements. Additional quick connect fittings are also supplied.

Crane Service truck wireless remote control receiver unit is generally programmable with up to 12 programmable channels including: Latched, momentary, Enable and other interlock modes.wrecker service pasadena tx

The total system weight is 2lbs.

Model Specifications:

The Crane Service Truck remote Control is generally developed for proportional and non-proportional hydraulic crane applications requiring up to twelve radio remote control functions.

Toggle switch controls with trigger switches are also available and it provides variable speed control of hydraulic pump solenoids.

The Split signal capability included in this system allows combined boom movements including ‘up and sideways’ and ‘extend and winch down’.

While using the Toggle switch controls need to be activated at the very first moment much before trigger switch and speed control will work.

Weatherproof receiver can be crane mounted and interfaces easily to crane electrical system with OEM style plug-in connector.